Summary
Diamond grinding plates suit concrete surface correction and coating removal, while grinding shoes add grinder-fit, segment, grit, and bond choices. Both support wet or dry work. The practical choice depends on whether you need a broadly compatible plate for leveling and cleanup or a shoe matched to the floor grinder, concrete condition, and grinding sequence.
Choose diamond grinding plates when the job centers on smoothing rough or patched concrete, feathering uneven joints or slab panels, removing hard epoxy, urethane, or other coatings, or grinding down bumps and raised or curled footpath panels. Choose diamond grinding shoes when the job requires a floor-grinder connection, a segment layout, a grit sequence, or a bond selected for the concrete condition.
Our diamond grinding plate fits most machines on the market and supports dry or wet use. Our diamond grinding shoes are available for concrete and terrazzo grinding and polishing, with configurations that can be matched to the machine and application.
| Criterion | Diamond grinding plate | Diamond grinding shoes |
|---|---|---|
| Main applications | Smoothing rough or patched floors; feathering uneven joints or slab panels; removing hard epoxies, urethane, and other coatings or toppings; grinding bumps and raised or curled footpath panels | Grinding and polishing concrete and terrazzo floors; aggressive concrete cleaning, smoothing, and coating removal |
| Operating mode | Dry or wet use | Dry or wet use |
What we compare
A diamond grinding plate is suited to correction work where the floor condition is the main concern. It covers rough or patched areas, uneven joints, slab panels, raised or curled footpath panels, and coatings or toppings. Select this format when the order begins with leveling or preparing a concrete surface for the next operation.
Grinding shoes cover concrete and terrazzo grinding and polishing. The two-bar, double-segment format supports aggressive cleaning, smoothing, and coating removal. Other shoe configurations include single segment, double segment, arrow segment, and PCD, allowing the tool layout to follow the removal or finishing task.
The plate is the simpler starting point when broad machine compatibility is important. Match the plate to the grinder and the surface task before ordering.
Shoes require a closer machine check. Available applications include CPS, HTC, Prep/Master, Levetac, and Husqvarna grinders. Shoe systems can also be supplied for bolt-on, quick-change, and magnetic plate connections, with adapters for ASL and Ironhorse equipment.
Concrete condition guides the shoe bond. Soft bond is for hard concrete, hard bond is for fresh concrete, and medium bond is for cases where the concrete type is uncertain. Shoe segment sizes include 40x10x10mm, 40x12x12mm, 25x12mm, and 25x10mm, with other sizes available on request.
Grinding shoes provide coarse, medium, and fine grit options from 16# to 300#, as well as PCD. Another available grit range is 6 to 150. Tell us which grit scale your grinder and finishing sequence use so we can match the order correctly.
The plate and shoes both support dry or wet operation. For the plate, choose the operating mode that fits the concrete correction or coating-removal process. For shoes, connect the wet or dry choice with the grinder, concrete or terrazzo work, and the intended cleaning, grinding, or polishing stage.
For a plate, send the grinder type and the surface problem, such as patched concrete, uneven joints, raised panels, epoxy, urethane, or another topping. For shoes, send the grinder brand or connection, concrete condition, segment configuration, grit scale, bond, and wet or dry process. These details give us the basis to match the tool to the job.
The two options
Choose a soft bond for hard concrete. Choose a hard bond for fresh concrete, and use a medium bond when the concrete type is uncertain. The bond is a shoe-selection decision, so include the floor condition with the grinder information. That lets us review the segment and bond together instead of treating them as separate order details.
A 30/40 grit shoe is used for concrete floor grinding and produces an even, obvious scratch pattern while opening old surfaces. A finer sequence can follow, including 60/80# and 120/150#. Send the existing surface and the intended next stage so we can discuss the appropriate shoe configuration.
Sase grinders can use bolt-on, quick-change, and magnetic plate connections. ASL and Ironhorse equipment can use adapters. Include the exact grinder and connection type in your request, because the shoe must match the interface as well as the concrete task. We can then review the available segment and bond combination for that setup.
Choose a diamond grinding plate for broad machine compatibility and concrete correction or coating removal. Choose grinding shoes when the grinder interface, concrete condition, segment arrangement, grit, and bond need to be specified together. Review our diamond grinding plate, then send your machine connection and floor condition for a quotation.
The company
Mingye tools Technologies Co.,Ltd manufacturing the Diamond cutting blades, Cup wheels,Grinding plates,TCT blades, Core drill bits for more than 10 years . With stable quality and high efficiency, we rapidly expaned our services to Euro,Southeast Asia ,South Asia,Russia ,America market. Our products help many customers make great achievenments excellent after-service allows we and our custermers become closer and closer.…
About Us ↗Visit company website ↗Related Products



Address
No.30 Gaoying Road ,Chang'an District,Shijiazhuang,Hebei Province
Business Hours
Mon to Saturday : 8.00 am - 7.00 pm
Sunday & Holidays : Closed